VOCORECAT
Vocore SuperNub First aid kit
i might have found something here ... cos i was like mwell ... as much as i can cram on it i will before i buy a second one so ... internet radio streamzersssz0rszes, should take little space
so i found a lot of people demonstrating but not explaining (you know, the DIY STFU nub RTFM kind ... sigh
then i found something HERE
i put on my log and in that hat
servercat@charon ~ $ ssh root@192.168.0.198
root@192.168.0.198's password: 


BusyBox v1.23.2 (2016-09-03 09:56:08 CST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Chaos Calmer, r49378)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------


so i go like if i could like emulate terminal colors in the css that would be nice but im not sure how to colour certain words without a tag im not even sure it can be done like that, i could define a class or soemthing probably to make the servercat@charon green-ish and the tilde/dollar purple-ish if i embed it in tagz0rs but mwell maybe later .... OFF TOPICCc
  1. root@fuckpencilpushingnazis:~# opkg install mpd
and like OMGZ!
Installing mpd-full (0.18.23-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/mpd-full_0.18.23-1_ramips_24kec.ipk.
Installing glib2 (2.43.4-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/glib2_2.43.4-1_ramips_24kec.ipk.
Installing libffi (3.0.13-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libffi_3.0.13-1_ramips_24kec.ipk.
Installing libattr (20150220-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libattr_20150220-1_ramips_24kec.ipk.
Installing libcurl (7.40.0-3) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/base/libcurl_7.40.0-3_ramips_24kec.ipk.
Installing libmpdclient (2.10-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libmpdclient_2.10-1_ramips_24kec.ipk.
Installing libstdcpp (4.8-linaro-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/base/libstdcpp_4.8-linaro-1_ramips_24kec.ipk.
Installing libflac (1.3.1-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libflac_1.3.1-1_ramips_24kec.ipk.
Installing libvorbisidec (1.0.3-20150104-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libvorbisidec_1.0.3-20150104-1_ramips_24kec.ipk.
Installing libogg (1.3.2-2) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libogg_1.3.2-2_ramips_24kec.ipk.
Installing libaudiofile (0.3.6-3) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libaudiofile_0.3.6-3_ramips_24kec.ipk.
Installing libfaad2 (2.7-3) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libfaad2_2.7-3_ramips_24kec.ipk.
Installing libffmpeg-mini (2.6.2-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libffmpeg-mini_2.6.2-1_ramips_24kec.ipk.
Installing libbz2 (1.0.6-2) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/base/libbz2_1.0.6-2_ramips_24kec.ipk.
Installing libmms (0.6.4-2) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libmms_0.6.4-2_ramips_24kec.ipk.
Installing libsndfile (1.0.25-2) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libsndfile_1.0.25-2_ramips_24kec.ipk.
Installing libvorbis (1.3.5-1) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/mt7628/packages/packages/libvorbis_1.3.5-1_ramips_24kec.ipk.
Configuring libffi.
Configuring libattr.
Configuring glib2.
Configuring libogg.
Configuring libvorbisidec.
Configuring libcurl.
Configuring libmms.
Configuring libflac.
Configuring libstdcpp.
Configuring libaudiofile.
Configuring libvorbis.
Configuring libmpdclient.
Configuring libfaad2.
Configuring libbz2.
Configuring libffmpeg-mini.
Configuring libsndfile.
Configuring mpd-full.
root@fuckpencilpushingnazis:~# 
and im like WOOOOaaw hold them horses can that fit on my 16mb machine ? ... mwell fine , the good thing is i expected to have to edit the sources file for the repos cos LUCI told me there was no such thing as "mpd" available
turns out it is, now how to git gud and it werking?
i also hereby already shall pone and pose the question of ham (i dont know why they call it ham-vraag in dutch but they do)
can i ... CAN I ! use the speechserver AND internet radio at once or will i get "device busy" ?
first things first ... lets try get something streaming there
as usual im trial and errorman so
root@fuckpencilpushingnazis:~# mpc play
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc add
^C
root@fuckpencilpushingnazis:~# mpc add http://www.kcrw.com/pls/kcrwmusic.pls
root@fuckpencilpushingnazis:~# mpc play
http://www.kcrw.com/pls/kcrwmusic.pls
[playing] #1/1   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc add http://207.200.96.227:8038/
root@fuckpencilpushingnazis:~# mpc play 0
http://www.kcrw.com/pls/kcrwmusic.pls
[playing] #1/2   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc play 1
http://www.kcrw.com/pls/kcrwmusic.pls
[playing] #1/2   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc play 2
http://207.200.96.227:8038/
[playing] #2/2   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc add http://d1qg6pckcqcdk0.cloudfront.net/jazz/dawnofmidi_first_05_taleoftwoworlds.m4a
root@fuckpencilpushingnazis:~# mpc play 3
http://d1qg6pckcqcdk0.cloudfront.net/jazz/dawnofmidi_first_05_taleoftwoworlds.m4a
[playing] #3/3   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc play 2
http://207.200.96.227:8038/
[playing] #2/3   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpd
socket: Failed to bind to '[::]:6600': Address already in use
root@fuckpencilpushingnazis:~# ls
numberofmotion_cam1.txt  roomstatus
root@fuckpencilpushingnazis:~# ls -al
drwxr-xr-x    1 root     root             0 Apr 13 14:47 .
drwxr-xr-x    1 root     root             0 Jan  1  1970 ..
drwx------    2 root     root             0 Apr 13 14:47 .ssh
-rw-r--r--    1 root     root            32 Apr 10 02:01 numberofmotion_cam1.txt
drwxr-xr-x    3 root     root             0 Apr  9 23:42 roomstatus
root@fuckpencilpushingnazis:~# mpc play 0
http://d1qg6pckcqcdk0.cloudfront.net/jazz/dawnofmidi_first_05_taleoftwoworlds.m4a
[playing] #3/3   0:05/6:44 (1%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpd kill
errno: Failed to open kill: No such file or directory
root@fuckpencilpushingnazis:~# mpc stop
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# mpc play 0
http://d1qg6pckcqcdk0.cloudfront.net/jazz/dawnofmidi_first_05_taleoftwoworlds.m4a
[playing] #3/3   0:00/0:00 (0%)
volume: n/a   repeat: off   random: off   single: off   consume: off
root@fuckpencilpushingnazis:~# 

gets me some kind of an oversaturated white noise phaser sound
since i dont know what im doing ... im like yay i has sound already
error: frame 1715: forbidden bit allocation value error: frame 1716: forbidden bit allocation value error: frame 1717: forbidden bit allocation value error: frame 1718: forbidden bit allocation value error: frame 1719: forbidden bit allocation value error: frame 1720: forbidden bit allocation value error: frame 1721: forbidden bit allocation value error: frame 1722: forbidden bit allocation value error: frame 1723: forbidden bit allocation value error: frame 1724: forbidden bit allocation value error: frame 1725: forbidden bit allocation value error: frame 1726: forbidden bit allocation value error: frame 1727: forbidden bit allocation value error: frame 1728: forbidden bit allocation value error: frame 1729: forbidden bit allocation value error: frame 1730: forbidden bit allocation value error: frame 1731: forbidden bit allocation value error: frame 1732: forbidden bit allocation value error: frame 1733: forbidden bit allocation value error: frame 1734: forbidden bit allocation value error: frame 1735: forbidden bit allocation value error: frame 1736: forbidden bit allocation value error: frame 1737: forbidden bit allocation value error: frame 1738: forbidden bit allocation value error: frame 1739: forbidden bit allocation value error: frame 1740: forbidden bit allocation value error: frame 1741: forbidden bit allocation value error: frame 1742: forbidden bit allocation value error: frame 1743: forbidden bit allocation value error: frame 1744: forbidden bit allocation value error: frame 1745: forbidden bit allocation value error: frame 1746: forbidden bit allocation value error: frame 1747: forbidden bit allocation value error: frame 1748: forbidden bit allocation value error: frame 1749: forbidden bit allocation value error: frame 1750: forbidden bit allocation value error: frame 1751: forbidden bit allocation value error: frame 1752: forbidden bit allocation value error: frame 1753: forbidden bit allocation value error: frame 1754: forbidden bit allocation value error: frame 1755: forbidden bit allocation value error: frame 1756: forbidden bit allocation value error: frame 1757: forbidden bit allocation value error: frame 1758: forbidden bit allocation value error: frame 1759: forbidden bit allocation value error: frame 1760: forbidden bit allocation value error: frame 1761: forbidden bit allocation value error: frame 1762: forbidden bit allocation value error: frame 1763: forbidden bit allocation value error: frame 1764: forbidden bit allocation value error: frame 1765: forbidden bit allocation value error: frame 1766: forbidden bit allocation value error: frame 1767: forbidden bit allocation value error: frame 1768: forbidden bit allocation value error: frame 1769: forbidden bit allocation value error: frame 1770: forbidden bit allocation value error: frame 1771: forbidden bit allocation value error: frame 1772: forbidden bit allocation value error: frame 1773: forbidden bit allocation value error: frame 1774: forbidden bit allocation value error: frame 1775: forbidden bit allocation value error: frame 1776: forbidden bit allocation value error: frame 1777: forbidden bit allocation value error: frame 1778: forbidden bit allocation value error: frame 1779: forbidden bit allocation value error: frame 1780: forbidden bit allocation value error: frame 1781: forbidden bit allocation value error: frame 1782: forbidden bit allocation value error: frame 1783: forbidden bit allocation value error: frame 1784: forbidden bit allocation value error: frame 1785: forbidden bit allocation value error: frame 1786: forbidden bit allocation value error: frame 1787: forbidden bit allocation value error: frame 1788: forbidden bit allocation value error: frame 1789: forbidden bit allocation value error: frame 1790: forbidden bit allocation value error: frame 1791: forbidden bit allocation value error: frame 1792: forbidden bit allocation value error: frame 1793: forbidden bit allocation value error: frame 1794: forbidden bit allocation value error: frame 1795: forbidden bit allocation value error: frame 1796: forbidden bit allocation value error: frame 1797: forbidden bit allocation value error: frame 1798: forbidden bit allocation value error: frame 1799: forbidden bit allocation value error: frame 1800: forbidden bit allocation value error: frame 1801: forbidden bit allocation value error: frame 1802: forbidden bit allocation value error: frame 1803: forbidden bit allocation value error: frame 1804: forbidden bit allocation value error: frame 1805: forbidden bit allocation value error: frame 1806: forbidden bit allocation value error: frame 1807: forbidden bit allocation value error: frame 1808: forbidden bit allocation value error: frame 1809: forbidden bit allocation value error: frame 1810: forbidden bit allocation value error: frame 1811: forbidden bit allocation value error: frame 1812: forbidden bit allocation value error: frame 1813: forbidden bit allocation value error: frame 1814: forbidden bit allocation value error: frame 1815: forbidden bit allocation value error: frame 1816: forbidden bit allocation value error: frame 1817: forbidden bit allocation value error: frame 1818: forbidden bit allocation value error: frame 1819: forbidden bit allocation value error: frame 1820: forbidden bit allocation value error: frame 1821: forbidden bit allocation value error: frame 1822: forbidden bit allocation value error: frame 1823: forbidden bit allocation value error: frame 1824: forbidden bit allocation value error: frame 1825: forbidden bit allocation value error: frame 1826: forbidden bit allocation value error: frame 1827: forbidden bit allocation value error: frame 1828: forbidden bit allocation value error: frame 1829: forbidden bit allocation value error: frame 1830: forbidden bit allocation value error: frame 1831: forbidden bit allocation value error: frame 1832: forbidden bit allocation value error: frame 1833: forbidden bit allocation value error: frame 1834: forbidden bit allocation value error: frame 1835: forbidden bit allocation value error: frame 1836: forbidden bit allocation value error: frame 1837: forbidden bit allocation value error: frame 1838: forbidden bit allocation value error: frame 1839: forbidden bit allocation value error: frame 1840: forbidden bit allocation value error: frame 1841: forbidden bit allocation value error: frame 1842: forbidden bit allocation value error: frame 1843: forbidden bit allocation value error: frame 1844: forbidden bit allocation value error: frame 1845: forbidden bit allocation value error: frame 1846: forbidden bit allocation value error: frame 1847: forbidden bit allocation value error: frame 1848: forbidden bit allocation value error: frame 1849: forbidden bit allocation value error: frame 1850: forbidden bit allocation value error: frame 1851: forbidden bit allocation value error: frame 1852: forbidden bit allocation value error: frame 1853: forbidden bit allocation value error: frame 1854: forbidden bit allocation value error: frame 1855: forbidden bit allocation value error: frame 1856: forbidden bit allocation value error: frame 1857: forbidden bit allocation value error: frame 1858: forbidden bit allocation value error: frame 1859: forbidden bit allocation value error: frame 1860: forbidden bit allocation value error: frame 1861: forbidden bit allocation value error: frame 1862: forbidden bit allocation value error: frame 1863: forbidden bit allocation value error: frame 1864: forbidden bit allocation value error: frame 1865: forbidden bit allocation value error: frame 1866: forbidden bit allocation value error: frame 1867: forbidden bit allocation value 3 frames decoded (0:00:00.0), +6.0 dB peak amplitude, 450 clipped samples root@fuckpencilpushingnazis:/mnt/mmcblk0p1# i guess not that then, so maybe
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# ls
1-ms-wav16-.wav  1-ms-wav32.wav   1.aiff           1.wav
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# madplay 1-ms-wav32.wav
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
error: frame 0: lost synchronization
0 frames decoded (0:00:00.0), -inf dB peak amplitude, 0 clipped samples
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# ls
1-320.mp3        1-ms-wav16-.wav  1-ms-wav32.wav   1.aiff           1.wav
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# madplay 1-320.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
         Artist: http://www.acapela-group.com/    --- Sharon
88 frames decoded (0:00:02.2), -4.9 dB peak amplitude, 0 clipped samples
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# packet_write_wait: Connection to 192.168.0.198 port 22: Broken pipe
servercat@charon ~ $
it seems to play the mp3 perfectly, exact same conversion i used last time ... ? ? ? ??? ? ? ????? something to do with the card being formatted on my android huawei or did madplay get an update since my previous install, once more i stand not corrected yet confused O_o
it plays the same mp3 without "eating" the last word this time and without playing it in a list and i have

NO CLUE

what i personally did to make that happenwhich is where the hipster goes but dude it werks and im like YEA but why didnt it? all fine, except
all the other samples ...
play just fine on madplay on my celeronserver here, but eat the last word when played on madplay on vocore, same samples same apt-install i suppose ? probably not since compiled for openwrt
so sample 1 plays complete, sample 2 to 5 get bitten off at the end
and thus we are as usual
nowhere, which is where we have always been in this hellhole, im dizzy, i suppose i have to be punished by the houseghost for non-compliance with ancient nazi rules or something and the things i had to do to get that flame fan omg ... then she walks into a rock i re-log and it just lies there where she spawns so should i consider another soundplayer since this voice-server thing was actually one of the things to do with that thing before i try figuring out if i can turn it into an electronic lock with my yubikey
and fuck this and that (ofcourse) im completely isolated since satellius and the faerie gang banned me from skype
life aint getting better here
niether is moneys and those pencilpushers keep trying to crawl up my ass ... wopss off-topic
so testing ... one, nop, two, better, three = hmz
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# madplay 4-320.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
         Artist: http://www.acapela-group.com/ -  Valeria
51 frames decoded (0:00:01.3), -5.8 dB peak amplitude, 0 clipped samples
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# madplay 4-320.mp3 0-320.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
>> 4-320.mp3
         Artist: http://www.acapela-group.com/ -  Valeria
51 frames decoded (0:00:01.3), -5.8 dB peak amplitude, 0 clipped samples
>> 0-320.mp3
         Artist: http://www.acapela-group.com/ -  Valeria
8 frames decoded (0:00:00.2), -44.3 dB peak amplitude, 0 clipped samples
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# madplay 4-320.mp3 0-320.mp3 0-320.mp3
MPEG Audio Decoder 0.15.2 (beta) - Copyright (C) 2000-2004 Robert Leslie et al.
>> 4-320.mp3
         Artist: http://www.acapela-group.com/ -  Valeria
51 frames decoded (0:00:01.3), -5.8 dB peak amplitude, 0 clipped samples
>> 0-320.mp3
         Artist: http://www.acapela-group.com/ -  Valeria
8 frames decoded (0:00:00.2), -44.3 dB peak amplitude, 0 clipped samples
>> 0-320.mp3
         Artist: http://www.acapela-group.com/ -  Valeria
8 frames decoded (0:00:00.2), -44.3 dB peak amplitude, 0 clipped samples
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# 
gives something like
  • did you close the doh
  • did you close the dor
  • did you close the door
where 0 is a small empty space mp3 as in meaning i have to call madplay three times to get the complete sample, to use this to call sentences or built sentences from different samples from several machines will use more resources and this just aint pretty is it ?

AAAAAAAAAAAAgh

tsch, well ...with testing it with playing empty mp3s after and then this : the only thing my lamer ass can conclude is that the sound device is closed too fast e.g. it plays sample number one if 2 and 3 even if empty are still invoked, looking at the picture, the bottom sample sounds complete, the top one sounds "did you close the do[stop]" ... something with audio device being closed too soon is the only thing i can come up with, but since its meant to be a music player it might be just that, thing is i cant find another player and ... espeak sounds like shit and probably take too much cpu since it has to calculate so the only thing i can see here is record the output on the other pc through pulse for a second longer so theres a second of zero at the end , to hear the complete voice ask me if i closed the door, to hear the cat came "in" or "out" which doesnt sound the last word either, which somewhat negates the purpose althoug the machine itself would know the status of the room etcetera
i dont like it, its not the elegant solution
the elegant solution is a small 64mb card with samples clipped like OCD fingernails to keep size small and to release the processing asap
which is what it does now but too fast
or maybe not maybe i just got , but HOW, i mean its audacity ...
should i bug vonger with this ?
i did ... no reply ... i wouldnt mind a reply like "its not made for that as long as theres a reply"
however while i was jamming on my yubikeys i found somehow along the way this particular
BusyBox v1.23.2 (2016-09-03 09:56:08 CST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Chaos Calmer, r49378)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@fuckpencilpushingnazis:~# cd /dev
root@fuckpencilpushingnazis:/dev# ls -
ls: -: No such file or directory
root@fuckpencilpushingnazis:/dev# ls
audio               kmem                mmcblk0p1           mtd3                mtd6ro              mtdblock6           ptmx                ttyS1
bus                 kmsg                mtd0                mtd3ro              mtdblock0           net                 pts                 ttyS2
console             log                 mtd0ro              mtd4                mtdblock1           network_latency     random              urandom
cpu_dma_latency     mem                 mtd1                mtd4ro              mtdblock2           network_throughput  shm                 watchdog
dsp                 memory_bandwidth    mtd1ro              mtd5                mtdblock3           null                snd                 watchdog0
full                mixer               mtd2                mtd5ro              mtdblock4           port                tty                 zero
i2c-0               mmcblk0             mtd2ro              mtd6                mtdblock5           ppp                 ttyS0
root@fuckpencilpushingnazis:/dev# df
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs                    9280       668      8612   7% /
/dev/root                 5888      5888         0 100% /rom
tmpfs                    63236       520     62716   1% /tmp
/dev/mtdblock6            9280       668      8612   7% /overlay
overlayfs:/overlay        9280       668      8612   7% /
tmpfs                      512         0       512   0% /dev
/dev/mmcblk0p1           59444      3028     56416   5% /mnt/mmcblk0p1
root@fuckpencilpushingnazis:/dev# dmesg
[    0.000000] Linux version 3.18.29 (vocore@ubuntu) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49378) ) #32 Sat Dec 24 22:01:05 CST 2016
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is VoCore2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803040d0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS2,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=000585fc
[    0.000000] Readback ErrCtl register=000585fc
[    0.000000] Memory: 126340K/131072K available (2530K kernel code, 131K rwdata, 520K rodata, 136K init, 186K bss, 4732K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.090000] rt2880-pinmux pinctrl: try to register 47 pins ...
[    0.090000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.090000] pinctrl core: add 2 pinmux maps
[    0.090000] rt2880-pinmux pinctrl: found group selector 4 for i2c
[    0.090000] rt2880-pinmux pinctrl: found group selector 27 for agpio
[    0.090000] rt2880-pinmux pinctrl: request pin 4 (io4) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 5 (io5) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.120000] Switched to clocksource MIPS
[    0.120000] NET: Registered protocol family 2
[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.140000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.140000] TCP: reno registered
[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.160000] NET: Registered protocol family 1
[    0.160000] PCI: CLS 0 bytes, default 32
[    0.160000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.190000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.200000] msgmni has been set to 246
[    0.210000] io scheduler noop registered
[    0.210000] io scheduler deadline registered (default)
[    0.220000] gdma-mt7628 10002800.gdma: revision: 3, channels: 16
[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.230000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.230000] pinctrl core: add 1 pinmux maps
[    0.230000] rt2880-pinmux pinctrl: found group selector 10 for uart0
[    0.230000] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
[    0.230000] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
[    0.230000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.240000] pinctrl core: add 1 pinmux maps
[    0.240000] rt2880-pinmux pinctrl: found group selector 3 for uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 45 (io45) for 10000d00.uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 46 (io46) for 10000d00.uart1
[    0.240000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
[    0.250000] pinctrl core: add 1 pinmux maps
[    0.250000] rt2880-pinmux pinctrl: found group selector 2 for uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 20 (io20) for 10000e00.uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 21 (io21) for 10000e00.uart2
[    0.250000] console [ttyS2] disabled
[    0.260000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
[    0.270000] console [ttyS2] enabled
[    0.270000] bootconsole [early0] disabled
[    0.280000] pinctrl core: add 1 pinmux maps
[    0.280000] rt2880-pinmux pinctrl: found group selector 8 for spi
[    0.280000] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
[    0.280000] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.290000] m25p80 spi32766.0: found gd25q128, expected en25q64
[    0.300000] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[    0.300000] m25p80 spi32766.0: using chunked io
[    0.310000] 4 ofpart partitions found on MTD device spi32766.0
[    0.320000] Creating 4 MTD partitions on "spi32766.0":
[    0.320000] 0x000000000000-0x000000030000 : "u-boot"
[    0.330000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.330000] 0x000000040000-0x000000050000 : "factory"
[    0.340000] 0x000000050000-0x000001000000 : "firmware"
[    0.410000] 2 uimage-fw partitions found on MTD device firmware
[    0.410000] 0x000000050000-0x000000167d92 : "kernel"
[    0.420000] 0x000000167d92-0x000001000000 : "rootfs"
[    0.420000] mtd: device 5 (rootfs) set to be root filesystem
[    0.430000] 1 squashfs-split partitions found on MTD device rootfs
[    0.440000] 0x0000006f0000-0x000001000000 : "rootfs_data"
[    0.450000] ralink_soc_eth 10100000.ethernet: generated random MAC address 36:41:63:4d:2e:2e
[    0.460000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.470000] mt7621_wdt 10000120.watchdog: Initialized
[    0.470000] TCP: cubic registered
[    0.480000] NET: Registered protocol family 17
[    0.480000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.500000] 8021q: 802.1Q VLAN Support v1.8
[    0.510000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.520000] Freeing unused kernel memory: 136K (8031e000 - 80340000)
[    2.320000] init: Console is alive
[    2.320000] init: - watchdog -
[    5.850000] usbcore: registered new interface driver usbfs
[    5.860000] usbcore: registered new interface driver hub
[    5.860000] usbcore: registered new device driver usb
[    5.870000] exFAT: Version 1.2.9
[    5.930000] SCSI subsystem initialized
[    5.940000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.950000] ehci-platform: EHCI generic platform driver
[    5.960000] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
[    5.970000] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
[    5.970000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    5.980000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    5.990000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.010000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.010000] usb usb1: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: USB hub found
[    6.020000] hub 1-0:1.0: 1 port detected
[    6.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.030000] ohci-platform: OHCI generic platform driver
[    6.040000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.040000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.050000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.120000] usb usb2: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: USB hub found
[    6.120000] hub 2-0:1.0: 1 port detected
[    6.140000] MTK MSDC device init.
[    6.140000] pinctrl core: add 1 pinmux maps
[    6.140000] rt2880-pinmux pinctrl: found group selector 9 for sdmode
[    6.140000] rt2880-pinmux pinctrl: request pin 22 (io22) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 23 (io23) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 24 (io24) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 25 (io25) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 26 (io26) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 28 (io28) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 29 (io29) for 10130000.sdhci
[    6.180000] mtk-sd: MediaTek MT6575 MSDC Driver
[    6.180000] sdhci: Secure Digital Host Controller Interface driver
[    6.190000] sdhci: Copyright(c) Pierre Ossman
[    6.200000] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.210000] usbcore: registered new interface driver usb-storage
[    6.300000] mmc0: new SD card at address 159e
[    6.300000] mmcblk mmc0:159e: no of_node; not parsing pinctrl DT
[    6.310000] mmcblk0: mmc0:159e SD064 59.1 MiB 
[    6.310000]  mmcblk0: p1
[    6.440000] init: - preinit -
[    7.690000] rt305x-esw 10110000.esw: link changed 0x00
[    7.890000] random: mktemp urandom read with 13 bits of entropy available
[   11.130000] mount_root: loading kmods from internal overlay
[   11.850000] jffs2: notice: (380) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.860000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.970000] block: extroot: not configured
[   12.170000] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.190000] mount_root: loading kmods from internal overlay
[   12.720000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.830000] block: extroot: not configured
[   12.840000] mount_root: switching to jffs2 overlay
[   12.870000] procd: - early -
[   12.870000] procd: - watchdog -
[   13.780000] procd: - ubus -
[   14.800000] procd: - init -
[   16.130000] NET: Registered protocol family 10
[   16.200000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   16.250000] tun: Universal TUN/TAP device driver, 1.6
[   16.260000] tun: (C) 1999-2004 Max Krasnyansky 
[   16.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.290000] i2c /dev entries driver
[   17.660000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   17.670000] <-- RTMPAllocAdapterBlock, Status=0
[   17.740000] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
[   17.780000] i2c-gpio i2c-gpio: using pins 5 (SDA) and 4 (SCL)
[   17.820000] Linux video capture interface: v2.00
[   17.870000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.890000] mt7628-i2s 10000a00.i2s: loaded, sys freq is 480MHz.
[   17.890000] es8388_codec_probe
[   17.900000] set system reference clock(mclk) to 12MHz.
[   17.910000] mt7628-audio audio-card: es8388-hifi <-> 10000a00.i2s mapping ok
[   17.920000] mt7628-audio audio-card: load
[   17.930000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.950000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
[   17.980000] usbcore: registered new interface driver usblp
[   18.000000] usbcore: registered new interface driver uvcvideo
[   18.000000] USB Video Class driver (1.1.1)
[   18.040000] xt_time: kernel timezone is -0000
[   18.050000] PPP generic driver version 2.4.2
[   18.060000] NET: Registered protocol family 24
[   24.870000] device eth0.1 entered promiscuous mode
[   24.880000] device eth0 entered promiscuous mode
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   26.330000] efuse_probe: efuse = 10000002
[   26.500000] tssi_0_target_pwr_g_band = 35
[   26.500000] tssi_1_target_pwr_g_band = 35
[   26.900000] br-lan: port 1(eth0.1) entered forwarding state
[   34.330000] <==== rt28xx_init, Status=0
[   35.150000] device ra0 entered promiscuous mode
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.990000] br-lan: port 2(ra0) entered disabled state
[   36.000000] br-lan: port 1(eth0.1) entered disabled state
[   36.020000] device eth0.1 left promiscuous mode
[   36.020000] br-lan: port 1(eth0.1) entered disabled state
[   36.030000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   36.050000] device ra0 left promiscuous mode
[   36.050000] br-lan: port 2(ra0) entered disabled state
[   36.400000] device eth0 left promiscuous mode
[   38.060000] device eth0.1 entered promiscuous mode
[   38.060000] device eth0 entered promiscuous mode
[   38.070000] br-lan: port 1(eth0.1) entered forwarding state
[   38.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.090000] device ra0 entered promiscuous mode
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   42.100000] br-lan: port 2(ra0) entered forwarding state
[   59.460000] random: nonblocking pool is initialized
[  410.910000] usb 1-1: new high-speed USB device number 6 using ehci-platform
root@fuckpencilpushingnazis:/dev# dmesg
[    0.000000] Linux version 3.18.29 (vocore@ubuntu) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49378) ) #32 Sat Dec 24 22:01:05 CST 2016
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is VoCore2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803040d0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS2,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=000585fc
[    0.000000] Readback ErrCtl register=000585fc
[    0.000000] Memory: 126340K/131072K available (2530K kernel code, 131K rwdata, 520K rodata, 136K init, 186K bss, 4732K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.090000] rt2880-pinmux pinctrl: try to register 47 pins ...
[    0.090000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.090000] pinctrl core: add 2 pinmux maps
[    0.090000] rt2880-pinmux pinctrl: found group selector 4 for i2c
[    0.090000] rt2880-pinmux pinctrl: found group selector 27 for agpio
[    0.090000] rt2880-pinmux pinctrl: request pin 4 (io4) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 5 (io5) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.120000] Switched to clocksource MIPS
[    0.120000] NET: Registered protocol family 2
[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.140000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.140000] TCP: reno registered
[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.160000] NET: Registered protocol family 1
[    0.160000] PCI: CLS 0 bytes, default 32
[    0.160000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.190000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.200000] msgmni has been set to 246
[    0.210000] io scheduler noop registered
[    0.210000] io scheduler deadline registered (default)
[    0.220000] gdma-mt7628 10002800.gdma: revision: 3, channels: 16
[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.230000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.230000] pinctrl core: add 1 pinmux maps
[    0.230000] rt2880-pinmux pinctrl: found group selector 10 for uart0
[    0.230000] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
[    0.230000] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
[    0.230000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.240000] pinctrl core: add 1 pinmux maps
[    0.240000] rt2880-pinmux pinctrl: found group selector 3 for uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 45 (io45) for 10000d00.uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 46 (io46) for 10000d00.uart1
[    0.240000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
[    0.250000] pinctrl core: add 1 pinmux maps
[    0.250000] rt2880-pinmux pinctrl: found group selector 2 for uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 20 (io20) for 10000e00.uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 21 (io21) for 10000e00.uart2
[    0.250000] console [ttyS2] disabled
[    0.260000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
[    0.270000] console [ttyS2] enabled
[    0.270000] bootconsole [early0] disabled
[    0.280000] pinctrl core: add 1 pinmux maps
[    0.280000] rt2880-pinmux pinctrl: found group selector 8 for spi
[    0.280000] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
[    0.280000] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.290000] m25p80 spi32766.0: found gd25q128, expected en25q64
[    0.300000] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[    0.300000] m25p80 spi32766.0: using chunked io
[    0.310000] 4 ofpart partitions found on MTD device spi32766.0
[    0.320000] Creating 4 MTD partitions on "spi32766.0":
[    0.320000] 0x000000000000-0x000000030000 : "u-boot"
[    0.330000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.330000] 0x000000040000-0x000000050000 : "factory"
[    0.340000] 0x000000050000-0x000001000000 : "firmware"
[    0.410000] 2 uimage-fw partitions found on MTD device firmware
[    0.410000] 0x000000050000-0x000000167d92 : "kernel"
[    0.420000] 0x000000167d92-0x000001000000 : "rootfs"
[    0.420000] mtd: device 5 (rootfs) set to be root filesystem
[    0.430000] 1 squashfs-split partitions found on MTD device rootfs
[    0.440000] 0x0000006f0000-0x000001000000 : "rootfs_data"
[    0.450000] ralink_soc_eth 10100000.ethernet: generated random MAC address 36:41:63:4d:2e:2e
[    0.460000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.470000] mt7621_wdt 10000120.watchdog: Initialized
[    0.470000] TCP: cubic registered
[    0.480000] NET: Registered protocol family 17
[    0.480000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.500000] 8021q: 802.1Q VLAN Support v1.8
[    0.510000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.520000] Freeing unused kernel memory: 136K (8031e000 - 80340000)
[    2.320000] init: Console is alive
[    2.320000] init: - watchdog -
[    5.850000] usbcore: registered new interface driver usbfs
[    5.860000] usbcore: registered new interface driver hub
[    5.860000] usbcore: registered new device driver usb
[    5.870000] exFAT: Version 1.2.9
[    5.930000] SCSI subsystem initialized
[    5.940000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.950000] ehci-platform: EHCI generic platform driver
[    5.960000] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
[    5.970000] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
[    5.970000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    5.980000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    5.990000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.010000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.010000] usb usb1: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: USB hub found
[    6.020000] hub 1-0:1.0: 1 port detected
[    6.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.030000] ohci-platform: OHCI generic platform driver
[    6.040000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.040000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.050000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.120000] usb usb2: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: USB hub found
[    6.120000] hub 2-0:1.0: 1 port detected
[    6.140000] MTK MSDC device init.
[    6.140000] pinctrl core: add 1 pinmux maps
[    6.140000] rt2880-pinmux pinctrl: found group selector 9 for sdmode
[    6.140000] rt2880-pinmux pinctrl: request pin 22 (io22) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 23 (io23) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 24 (io24) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 25 (io25) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 26 (io26) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 28 (io28) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 29 (io29) for 10130000.sdhci
[    6.180000] mtk-sd: MediaTek MT6575 MSDC Driver
[    6.180000] sdhci: Secure Digital Host Controller Interface driver
[    6.190000] sdhci: Copyright(c) Pierre Ossman
[    6.200000] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.210000] usbcore: registered new interface driver usb-storage
[    6.300000] mmc0: new SD card at address 159e
[    6.300000] mmcblk mmc0:159e: no of_node; not parsing pinctrl DT
[    6.310000] mmcblk0: mmc0:159e SD064 59.1 MiB 
[    6.310000]  mmcblk0: p1
[    6.440000] init: - preinit -
[    7.690000] rt305x-esw 10110000.esw: link changed 0x00
[    7.890000] random: mktemp urandom read with 13 bits of entropy available
[   11.130000] mount_root: loading kmods from internal overlay
[   11.850000] jffs2: notice: (380) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.860000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.970000] block: extroot: not configured
[   12.170000] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.190000] mount_root: loading kmods from internal overlay
[   12.720000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.830000] block: extroot: not configured
[   12.840000] mount_root: switching to jffs2 overlay
[   12.870000] procd: - early -
[   12.870000] procd: - watchdog -
[   13.780000] procd: - ubus -
[   14.800000] procd: - init -
[   16.130000] NET: Registered protocol family 10
[   16.200000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   16.250000] tun: Universal TUN/TAP device driver, 1.6
[   16.260000] tun: (C) 1999-2004 Max Krasnyansky 
[   16.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.290000] i2c /dev entries driver
[   17.660000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   17.670000] <-- RTMPAllocAdapterBlock, Status=0
[   17.740000] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
[   17.780000] i2c-gpio i2c-gpio: using pins 5 (SDA) and 4 (SCL)
[   17.820000] Linux video capture interface: v2.00
[   17.870000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.890000] mt7628-i2s 10000a00.i2s: loaded, sys freq is 480MHz.
[   17.890000] es8388_codec_probe
[   17.900000] set system reference clock(mclk) to 12MHz.
[   17.910000] mt7628-audio audio-card: es8388-hifi <-> 10000a00.i2s mapping ok
[   17.920000] mt7628-audio audio-card: load
[   17.930000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.950000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
[   17.980000] usbcore: registered new interface driver usblp
[   18.000000] usbcore: registered new interface driver uvcvideo
[   18.000000] USB Video Class driver (1.1.1)
[   18.040000] xt_time: kernel timezone is -0000
[   18.050000] PPP generic driver version 2.4.2
[   18.060000] NET: Registered protocol family 24
[   24.870000] device eth0.1 entered promiscuous mode
[   24.880000] device eth0 entered promiscuous mode
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   26.330000] efuse_probe: efuse = 10000002
[   26.500000] tssi_0_target_pwr_g_band = 35
[   26.500000] tssi_1_target_pwr_g_band = 35
[   26.900000] br-lan: port 1(eth0.1) entered forwarding state
[   34.330000] <==== rt28xx_init, Status=0
[   35.150000] device ra0 entered promiscuous mode
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.990000] br-lan: port 2(ra0) entered disabled state
[   36.000000] br-lan: port 1(eth0.1) entered disabled state
[   36.020000] device eth0.1 left promiscuous mode
[   36.020000] br-lan: port 1(eth0.1) entered disabled state
[   36.030000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   36.050000] device ra0 left promiscuous mode
[   36.050000] br-lan: port 2(ra0) entered disabled state
[   36.400000] device eth0 left promiscuous mode
[   38.060000] device eth0.1 entered promiscuous mode
[   38.060000] device eth0 entered promiscuous mode
[   38.070000] br-lan: port 1(eth0.1) entered forwarding state
[   38.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.090000] device ra0 entered promiscuous mode
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   42.100000] br-lan: port 2(ra0) entered forwarding state
[   59.460000] random: nonblocking pool is initialized
[  410.910000] usb 1-1: new high-speed USB device number 6 using ehci-platform
[  542.640000] usb 2-1: new low-speed USB device number 4 using ohci-platform
[  542.830000] usb 2-1: device descriptor read/64, error -62
[  543.120000] usb 2-1: device descriptor read/64, error -62
[  543.410000] usb 2-1: new low-speed USB device number 5 using ohci-platform
[  543.600000] usb 2-1: device descriptor read/64, error -62
[  543.890000] usb 2-1: device descriptor read/64, error -62
[  544.180000] usb 2-1: new low-speed USB device number 6 using ohci-platform
[  544.600000] usb 2-1: device not accepting address 6, error -62
[  544.780000] usb 2-1: new low-speed USB device number 7 using ohci-platform
[  545.200000] usb 2-1: device not accepting address 7, error -62
[  545.200000] usb usb2-port1: unable to enumerate USB device
root@fuckpencilpushingnazis:/dev# echo Y | sudo tee /sys/module/usbcore/parameters/old_scheme_first
-ash: sudo: not found
root@fuckpencilpushingnazis:/dev# echo Y | tee /sys/module/usbcore/parameters/old_scheme_first
Y
root@fuckpencilpushingnazis:/dev# cd /sys
root@fuckpencilpushingnazis:/sys# ls
block     bus       class     dev       devices   firmware  fs        kernel    module
root@fuckpencilpushingnazis:/sys# cd module
root@fuckpencilpushingnazis:/sys/module# ls
8250                    i2c_gpio                ledtrig_usbdev          nf_nat_ftp              regmap_i2c              snd_soc_es8388          videodev
block                   input_core              mbcache                 nf_nat_ipv4             regmap_spi              snd_soc_mt7628_audio    workqueue
crc16                   ip6_tables              mmc_block               nf_nat_masquerade_ipv4  reiserfs                snd_soc_mt7628_i2s      x_tables
crc_ccitt               ip6t_REJECT             mmc_core                nf_reject_ipv4          scsi_mod                snd_timer               xt_CT
crypto_hash             ip6table_filter         msdos                   nf_reject_ipv6          sd_mod                  soundcore               xt_LOG
dma_shared_buffer       ip6table_mangle         mt_wifi                 nls_base                sdhci                   spurious                xt_REDIRECT
ehci_hcd                ip6table_raw            mtk_sd                  nls_cp437               sdhci_pltfm             tcp_cubic               xt_TCPMSS
ehci_platform           ip_tables               nf_conntrack            nls_iso8859_1           slhc                    tun                     xt_comment
exfat                   ipt_MASQUERADE          nf_conntrack_ftp        nls_utf8                snd                     usb_common              xt_conntrack
ext4                    ipt_REJECT              nf_conntrack_ipv4       ntfs                    snd_compress            usb_storage             xt_id
fat                     iptable_filter          nf_conntrack_ipv6       ohci_hcd                snd_hwdep               usbcore                 xt_limit
firmware_class          iptable_mangle          nf_conntrack_rtcache    ohci_platform           snd_mixer_oss           usblp                   xt_mac
gpio_button_hotplug     iptable_nat             nf_defrag_ipv4          ppp_async               snd_pcm                 uvcvideo                xt_mark
hfs                     iptable_raw             nf_defrag_ipv6          ppp_generic             snd_pcm_dmaengine       v4l2_common             xt_multiport
hfsplus                 ipv6                    nf_log_common           pppoe                   snd_pcm_oss             vfat                    xt_nat
i2c_algo_bit            jbd2                    nf_log_ipv4             pppox                   snd_rawmidi             videobuf2_core          xt_state
i2c_core                kernel                  nf_log_ipv6             printk                  snd_seq_device          videobuf2_memops        xt_tcpudp
i2c_dev                 leds_gpio               nf_nat                  regmap_core             snd_soc_core            videobuf2_vmalloc       xt_time
root@fuckpencilpushingnazis:/sys/module# cd usbcore
root@fuckpencilpushingnazis:/sys/module/usbcore# ls
coresize    drivers     holders     initsize    initstate   parameters  refcnt      sections    taint       uevent
root@fuckpencilpushingnazis:/sys/module/usbcore# cd parameters
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# ls
authorized_default          initial_descriptor_timeout  old_scheme_first            usbfs_snoop
blinkenlights               nousb                       usbfs_memory_mb             use_both_schemes
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# cat old_scheme_first
Y
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# dmesg
[    0.000000] Linux version 3.18.29 (vocore@ubuntu) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49378) ) #32 Sat Dec 24 22:01:05 CST 2016
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is VoCore2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803040d0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS2,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=000585fc
[    0.000000] Readback ErrCtl register=000585fc
[    0.000000] Memory: 126340K/131072K available (2530K kernel code, 131K rwdata, 520K rodata, 136K init, 186K bss, 4732K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.090000] rt2880-pinmux pinctrl: try to register 47 pins ...
[    0.090000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.090000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.090000] pinctrl core: add 2 pinmux maps
[    0.090000] rt2880-pinmux pinctrl: found group selector 4 for i2c
[    0.090000] rt2880-pinmux pinctrl: found group selector 27 for agpio
[    0.090000] rt2880-pinmux pinctrl: request pin 4 (io4) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: request pin 5 (io5) for pinctrl
[    0.090000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.100000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.110000] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.120000] Switched to clocksource MIPS
[    0.120000] NET: Registered protocol family 2
[    0.130000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.130000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.140000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.140000] TCP: reno registered
[    0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.160000] NET: Registered protocol family 1
[    0.160000] PCI: CLS 0 bytes, default 32
[    0.160000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.170000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.190000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.200000] msgmni has been set to 246
[    0.210000] io scheduler noop registered
[    0.210000] io scheduler deadline registered (default)
[    0.220000] gdma-mt7628 10002800.gdma: revision: 3, channels: 16
[    0.230000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.230000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.230000] pinctrl core: add 1 pinmux maps
[    0.230000] rt2880-pinmux pinctrl: found group selector 10 for uart0
[    0.230000] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
[    0.230000] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
[    0.230000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.240000] pinctrl core: add 1 pinmux maps
[    0.240000] rt2880-pinmux pinctrl: found group selector 3 for uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 45 (io45) for 10000d00.uart1
[    0.240000] rt2880-pinmux pinctrl: request pin 46 (io46) for 10000d00.uart1
[    0.240000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
[    0.250000] pinctrl core: add 1 pinmux maps
[    0.250000] rt2880-pinmux pinctrl: found group selector 2 for uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 20 (io20) for 10000e00.uart2
[    0.250000] rt2880-pinmux pinctrl: request pin 21 (io21) for 10000e00.uart2
[    0.250000] console [ttyS2] disabled
[    0.260000] 10000e00.uart2: ttyS2 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
[    0.270000] console [ttyS2] enabled
[    0.270000] bootconsole [early0] disabled
[    0.280000] pinctrl core: add 1 pinmux maps
[    0.280000] rt2880-pinmux pinctrl: found group selector 8 for spi
[    0.280000] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
[    0.280000] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
[    0.280000] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    0.290000] m25p80 spi32766.0: found gd25q128, expected en25q64
[    0.300000] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
[    0.300000] m25p80 spi32766.0: using chunked io
[    0.310000] 4 ofpart partitions found on MTD device spi32766.0
[    0.320000] Creating 4 MTD partitions on "spi32766.0":
[    0.320000] 0x000000000000-0x000000030000 : "u-boot"
[    0.330000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.330000] 0x000000040000-0x000000050000 : "factory"
[    0.340000] 0x000000050000-0x000001000000 : "firmware"
[    0.410000] 2 uimage-fw partitions found on MTD device firmware
[    0.410000] 0x000000050000-0x000000167d92 : "kernel"
[    0.420000] 0x000000167d92-0x000001000000 : "rootfs"
[    0.420000] mtd: device 5 (rootfs) set to be root filesystem
[    0.430000] 1 squashfs-split partitions found on MTD device rootfs
[    0.440000] 0x0000006f0000-0x000001000000 : "rootfs_data"
[    0.450000] ralink_soc_eth 10100000.ethernet: generated random MAC address 36:41:63:4d:2e:2e
[    0.460000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.470000] mt7621_wdt 10000120.watchdog: Initialized
[    0.470000] TCP: cubic registered
[    0.480000] NET: Registered protocol family 17
[    0.480000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.500000] 8021q: 802.1Q VLAN Support v1.8
[    0.510000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.520000] Freeing unused kernel memory: 136K (8031e000 - 80340000)
[    2.320000] init: Console is alive
[    2.320000] init: - watchdog -
[    5.850000] usbcore: registered new interface driver usbfs
[    5.860000] usbcore: registered new interface driver hub
[    5.860000] usbcore: registered new device driver usb
[    5.870000] exFAT: Version 1.2.9
[    5.930000] SCSI subsystem initialized
[    5.940000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.950000] ehci-platform: EHCI generic platform driver
[    5.960000] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
[    5.970000] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
[    5.970000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    5.980000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    5.990000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    6.010000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    6.010000] usb usb1: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    6.010000] hub 1-0:1.0: USB hub found
[    6.020000] hub 1-0:1.0: 1 port detected
[    6.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.030000] ohci-platform: OHCI generic platform driver
[    6.040000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    6.040000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    6.050000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    6.120000] usb usb2: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    6.120000] hub 2-0:1.0: USB hub found
[    6.120000] hub 2-0:1.0: 1 port detected
[    6.140000] MTK MSDC device init.
[    6.140000] pinctrl core: add 1 pinmux maps
[    6.140000] rt2880-pinmux pinctrl: found group selector 9 for sdmode
[    6.140000] rt2880-pinmux pinctrl: request pin 22 (io22) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 23 (io23) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 24 (io24) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 25 (io25) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 26 (io26) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 28 (io28) for 10130000.sdhci
[    6.140000] rt2880-pinmux pinctrl: request pin 29 (io29) for 10130000.sdhci
[    6.180000] mtk-sd: MediaTek MT6575 MSDC Driver
[    6.180000] sdhci: Secure Digital Host Controller Interface driver
[    6.190000] sdhci: Copyright(c) Pierre Ossman
[    6.200000] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.210000] usbcore: registered new interface driver usb-storage
[    6.300000] mmc0: new SD card at address 159e
[    6.300000] mmcblk mmc0:159e: no of_node; not parsing pinctrl DT
[    6.310000] mmcblk0: mmc0:159e SD064 59.1 MiB 
[    6.310000]  mmcblk0: p1
[    6.440000] init: - preinit -
[    7.690000] rt305x-esw 10110000.esw: link changed 0x00
[    7.890000] random: mktemp urandom read with 13 bits of entropy available
[   11.130000] mount_root: loading kmods from internal overlay
[   11.850000] jffs2: notice: (380) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.860000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   11.970000] block: extroot: not configured
[   12.170000] jffs2: notice: (377) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.190000] mount_root: loading kmods from internal overlay
[   12.720000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.830000] block: extroot: not configured
[   12.840000] mount_root: switching to jffs2 overlay
[   12.870000] procd: - early -
[   12.870000] procd: - watchdog -
[   13.780000] procd: - ubus -
[   14.800000] procd: - init -
[   16.130000] NET: Registered protocol family 10
[   16.200000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   16.250000] tun: Universal TUN/TAP device driver, 1.6
[   16.260000] tun: (C) 1999-2004 Max Krasnyansky 
[   16.270000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.290000] i2c /dev entries driver
[   17.660000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   17.670000] <-- RTMPAllocAdapterBlock, Status=0
[   17.740000] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
[   17.780000] i2c-gpio i2c-gpio: using pins 5 (SDA) and 4 (SCL)
[   17.820000] Linux video capture interface: v2.00
[   17.870000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   17.890000] mt7628-i2s 10000a00.i2s: loaded, sys freq is 480MHz.
[   17.890000] es8388_codec_probe
[   17.900000] set system reference clock(mclk) to 12MHz.
[   17.910000] mt7628-audio audio-card: es8388-hifi <-> 10000a00.i2s mapping ok
[   17.920000] mt7628-audio audio-card: load
[   17.930000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.950000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
[   17.980000] usbcore: registered new interface driver usblp
[   18.000000] usbcore: registered new interface driver uvcvideo
[   18.000000] USB Video Class driver (1.1.1)
[   18.040000] xt_time: kernel timezone is -0000
[   18.050000] PPP generic driver version 2.4.2
[   18.060000] NET: Registered protocol family 24
[   24.870000] device eth0.1 entered promiscuous mode
[   24.880000] device eth0 entered promiscuous mode
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   24.900000] br-lan: port 1(eth0.1) entered forwarding state
[   26.330000] efuse_probe: efuse = 10000002
[   26.500000] tssi_0_target_pwr_g_band = 35
[   26.500000] tssi_1_target_pwr_g_band = 35
[   26.900000] br-lan: port 1(eth0.1) entered forwarding state
[   34.330000] <==== rt28xx_init, Status=0
[   35.150000] device ra0 entered promiscuous mode
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.160000] br-lan: port 2(ra0) entered forwarding state
[   35.990000] br-lan: port 2(ra0) entered disabled state
[   36.000000] br-lan: port 1(eth0.1) entered disabled state
[   36.020000] device eth0.1 left promiscuous mode
[   36.020000] br-lan: port 1(eth0.1) entered disabled state
[   36.030000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   36.050000] device ra0 left promiscuous mode
[   36.050000] br-lan: port 2(ra0) entered disabled state
[   36.400000] device eth0 left promiscuous mode
[   38.060000] device eth0.1 entered promiscuous mode
[   38.060000] device eth0 entered promiscuous mode
[   38.070000] br-lan: port 1(eth0.1) entered forwarding state
[   38.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.080000] br-lan: port 1(eth0.1) entered forwarding state
[   40.090000] device ra0 entered promiscuous mode
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   40.100000] br-lan: port 2(ra0) entered forwarding state
[   42.100000] br-lan: port 2(ra0) entered forwarding state
[   59.460000] random: nonblocking pool is initialized
[  410.910000] usb 1-1: new high-speed USB device number 6 using ehci-platform
[  542.640000] usb 2-1: new low-speed USB device number 4 using ohci-platform
[  542.830000] usb 2-1: device descriptor read/64, error -62
[  543.120000] usb 2-1: device descriptor read/64, error -62
[  543.410000] usb 2-1: new low-speed USB device number 5 using ohci-platform
[  543.600000] usb 2-1: device descriptor read/64, error -62
[  543.890000] usb 2-1: device descriptor read/64, error -62
[  544.180000] usb 2-1: new low-speed USB device number 6 using ohci-platform
[  544.600000] usb 2-1: device not accepting address 6, error -62
[  544.780000] usb 2-1: new low-speed USB device number 7 using ohci-platform
[  545.200000] usb 2-1: device not accepting address 7, error -62
[  545.200000] usb usb2-port1: unable to enumerate USB device
[  706.790000] usb 2-1: new low-speed USB device number 8 using ohci-platform
[  707.210000] usb 2-1: device not accepting address 8, error -62
[  707.390000] usb 2-1: new low-speed USB device number 9 using ohci-platform
[  707.810000] usb 2-1: device not accepting address 9, error -62
[  707.990000] usb 2-1: new low-speed USB device number 10 using ohci-platform
[  708.180000] usb 2-1: device descriptor read/64, error -62
[  708.470000] usb 2-1: device descriptor read/64, error -62
[  708.760000] usb 2-1: new low-speed USB device number 11 using ohci-platform
[  708.950000] usb 2-1: device descriptor read/64, error -62
[  709.240000] usb 2-1: device descriptor read/64, error -62
[  709.350000] usb usb2-port1: unable to enumerate USB device
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# ls
authorized_default          initial_descriptor_timeout  old_scheme_first            usbfs_snoop
blinkenlights               nousb                       usbfs_memory_mb             use_both_schemes
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# cat *
-1
N
5000
N
Y
16
N
Y
root@fuckpencilpushingnazis:/sys/module/usbcore/parameters# cd ..
root@fuckpencilpushingnazis:/sys/module/usbcore# ls
coresize    drivers     holders     initsize    initstate   parameters  refcnt      sections    taint       uevent
root@fuckpencilpushingnazis:/sys/module/usbcore# cd drivers
root@fuckpencilpushingnazis:/sys/module/usbcore/drivers# ls
usb:hub    usb:usb    usb:usbfs
root@fuckpencilpushingnazis:/sys/module/usbcore/drivers# cd /usr
root@fuckpencilpushingnazis:/usr# cd include
-ash: cd: can't cd to include
root@fuckpencilpushingnazis:/usr# ls
bin    lib    sbin   share
root@fuckpencilpushingnazis:/usr# cd bin
root@fuckpencilpushingnazis:/usr/bin# ls
[                 bunzip2           dbus-launch.real  free              jshn              lua               passwd            signify           time              wget
[[                bzcat             dbus-uuidgen      gphoto2           jsonfilter        luci-bwc          pgrep             sort              top               which
alsamixer         clear             dirname           head              killall           madplay           printf            ssh               tr                xargs
amixer            cmp               dropbearkey       hexdump           less              md5sum            readlink          strings           traceroute        yes
aplay             crontab           du                hostid            logger            mjpg_streamer     reset             tail              uniq
arecord           cut               env               id                lpq               mkfifo            scp               tee               uptime
awk               dbclient          expr              iperf3            lpr               nc                seq               telnet            usign
basename          dbus-launch       find              iwinfo            lsusb             nslookup          shairport-sync    test              wc
root@fuckpencilpushingnazis:/usr/bin# aplay
Usage: aplay [OPTION]... [FILE]...

-h, --help              help
    --version           print current version
-l, --list-devices      list all soundcards and digital audio devices
-L, --list-pcms         list device names
-D, --device=NAME       select PCM by name
-q, --quiet             quiet mode
-t, --file-type TYPE    file type (voc, wav, raw or au)
-c, --channels=#        channels
-f, --format=FORMAT     sample format (case insensitive)
-r, --rate=#            sample rate
-d, --duration=#        interrupt after # seconds
-M, --mmap              mmap stream
-N, --nonblock          nonblocking mode
-F, --period-time=#     distance between interrupts is # microseconds
-B, --buffer-time=#     buffer duration is # microseconds
    --period-size=#     distance between interrupts is # frames
    --buffer-size=#     buffer duration is # frames
-A, --avail-min=#       min available space for wakeup is # microseconds
-R, --start-delay=#     delay for automatic PCM start is # microseconds 
                        (relative to buffer size if <= 0)
-T, --stop-delay=#      delay for automatic PCM stop is # microseconds from xrun
-v, --verbose           show PCM structure and setup (accumulative)
-V, --vumeter=TYPE      enable VU meter (TYPE: mono or stereo)
-I, --separate-channels one file for each channel
-i, --interactive       allow interactive operation from stdin
-m, --chmap=ch1,ch2,..  Give the channel map to override or follow
    --disable-resample  disable automatic rate resample
    --disable-channels  disable automatic channel conversions
    --disable-format    disable automatic format conversions
    --disable-softvol   disable software volume control (softvol)
    --test-position     test ring buffer position
    --test-coef=#       test coefficient for ring buffer position (default 8)
                        expression for validation is: coef * (buffer_size / 2)
    --test-nowait       do not wait for ring buffer - eats whole CPU
    --max-file-time=#   start another output file when the old file has recorded
                        for this many seconds
    --process-id-file   write the process ID here
    --use-strftime      apply the strftime facility to the output file name
    --dump-hw-params    dump hw_params of the device
    --fatal-errors      treat all errors as fatal
Recognized sample formats are: S8 U8 S16_LE S16_BE U16_LE U16_BE S24_LE S24_BE U24_LE U24_BE S32_LE S32_BE U32_LE U32_BE FLOAT_LE FLOAT_BE FLOAT64_LE FLOAT64_BE IEC958_SUBFRAME_LE IEC958_SUBFRAME_BE MU_LAW A_LAW IMA_ADPCM MPEG GSM SPECIAL S24_3LE S24_3BE U24_3LE U24_3BE S20_3LE S20_3BE U20_3LE U20_3BE S18_3LE S18_3BE U18_3LE U18_3BE G723_24 G723_24_1B G723_40 G723_40_1B DSD_U8 DSD_U16_LE
Some of these may not be available on selected hardware
The available format shortcuts are:
-f cd (16 bit little endian, 44100, stereo)
-f cdr (16 bit big endian, 44100, stereo)
-f dat (16 bit little endian, 48000, stereo)
root@fuckpencilpushingnazis:/usr/bin# cd /mnt/mmcblk0p1
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# ls
0-320.mp3        1-2-320.mp3      1-ms-wav16-.wav  1.aiff           2-1-320.mp3      4-320.mp3        4.mp3            4.wav
0.mp3            1-320.mp3        1-ms-wav32.wav   1.wav            3-320.mp3        4.aiff           4.wa
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 1.wav
Playing WAVE '1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 1.wav
Playing WAVE '1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 1.wav
Playing WAVE '1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 4.mp3
Playing raw data '4.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 4.wav
Playing WAVE '4.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 4-320.mp3
Playing raw data '4-320.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 4.aiff
Playing raw data '4.aiff' : Unsigned 8 bit, Rate 8000 Hz, Mono
^CAborted by signal Interrupt...
aplay: pcm_write:1939: write error: Interrupted system call
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# aplay 4.wa
Playing WAVE '4.wa' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# ls -al
drwxrwxrwx    3 root     root         16384 Jan  1  1970 .
drwxr-xr-x    1 root     root             0 Jan  1  1970 ..
drwxrwxrwx    2 root     root          4096 Apr  5 16:09 .android_secure
-rwxrwxrwx    1 root     root          9476 Apr  6 01:18 0-320.mp3
-rwxrwxrwx    1 root     root             4 Apr  6 01:16 0.mp3
-rwxrwxrwx    1 root     root         59629 Apr  6 00:26 1-2-320.mp3
-rwxrwxrwx    1 root     root         93071 Apr  5 23:49 1-320.mp3
-rwxrwxrwx    1 root     root        398260 Apr  5 23:39 1-ms-wav16-.wav
-rwxrwxrwx    1 root     root        796372 Apr  5 23:47 1-ms-wav32.wav
-rwxrwxrwx    1 root     root        398258 Apr  5 23:36 1.aiff
-rwxrwxrwx    1 root     root        398260 Apr  5 22:14 1.wav
-rwxrwxrwx    1 root     root         81619 Apr  6 00:26 2-1-320.mp3
-rwxrwxrwx    1 root     root         62764 Apr  6 00:32 3-320.mp3
-rwxrwxrwx    1 root     root         54406 Apr  6 00:34 4-320.mp3
-rwxrwxrwx    1 root     root        229560 Apr  6 01:51 4.aiff
-rwxrwxrwx    1 root     root         12972 Apr  6 01:46 4.mp3
-rwxrwxrwx    1 root     root        229564 Apr  6 02:17 4.wa
-rwxrwxrwx    1 root     root        229564 Apr  6 01:45 4.wav
root@fuckpencilpushingnazis:/mnt/mmcblk0p1#
thingy called "aplay" which seems to come standard ... it plays the .wavs and .wa (rawdata) PERFECTLY, the aiff and mp3 at any bitrate come out as white or whatevernoise however so
problem solved yes but id still like to do it with that 64mb card which means .wav files are eebulnazishytegobbledingz
getting that yubikey to even appear seems not a direct option however, it does do "something" i just cant find what error message -62 means

sigh...

well at least i know what to do other than jerk off on my friday night with the no pussy and no penny would be nice to get paid waiting for phonecalls on "press play on tape, sir, please reboot your computer and see what it does if you please, thanks" and shit like that but well, hellgium be hellgium
so pff, 5 in the morning, i could use a drink
madplay wont do it, aplay wont play mp3s so i cut them up to keep filesize small in an attempt to make words re-usable over different sentences, must be not that hard to do with some simple grepcatting
servercat@charon ~/COMMON/minimalMel/voice $ scp -r cutup root@192.168.0.198:/mnt/mmcblk0p1
root@192.168.0.198's password: 
the.wav                                       100%   26KB  25.6KB/s   00:00    
did.wav                                       100%   33KB  32.9KB/s   00:00    
bar.wav                                       100%   33KB  32.7KB/s   00:00    
you.wav                                       100%   25KB  25.0KB/s   00:00    
door.wav                                      100%   65KB  65.4KB/s   00:00    
servercat@charon ~/COMMON/minimalMel/voice $ ssh root@192.168.0.198 aplay /mnt/mmcblk0p1/cutup/*
root@192.168.0.198's password: 
Playing WAVE '/mnt/mmcblk0p1/cutup/bar.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE '/mnt/mmcblk0p1/cutup/did.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE '/mnt/mmcblk0p1/cutup/door.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE '/mnt/mmcblk0p1/cutup/the.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE '/mnt/mmcblk0p1/cutup/you.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
servercat@charon ~/COMMON/minimalMel/voice $ ssh root @192.168.0.198
ssh: Could not resolve hostname root: No address associated with hostname
servercat@charon ~/COMMON/minimalMel/voice $ ssh root@192.168.0.198
root@192.168.0.198's password: 


BusyBox v1.23.2 (2016-09-03 09:56:08 CST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Chaos Calmer, r49378)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@fuckpencilpushingnazis:~# cd mnt/mmcblkp01/cutup
-ash: cd: can't cd to mnt/mmcblkp01/cutup
root@fuckpencilpushingnazis:~# play did.wav you.wav bar.wav the.wav door.wav
-ash: play: not found
root@fuckpencilpushingnazis:~# aplay did.wav you.wav bar.wav the.wav door.wav
did.wav: No such file or directory
root@fuckpencilpushingnazis:~# ls 
root@fuckpencilpushingnazis:~# grmbl wtf
-ash: grmbl: not found
root@fuckpencilpushingnazis:~# uh 5 in the morning ah
-ash: uh: not found
root@fuckpencilpushingnazis:~# cd /mnt/mmcblkp01
-ash: cd: can't cd to /mnt/mmcblkp01
root@fuckpencilpushingnazis:~# cd mnt
-ash: cd: can't cd to mnt
root@fuckpencilpushingnazis:~# ls
root@fuckpencilpushingnazis:~# cd /mnt
root@fuckpencilpushingnazis:/mnt# ls
mmcblk0p1
root@fuckpencilpushingnazis:/mnt# cd mmcblk0p1
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# ls
0-320.mp3        1-2-320.mp3      1-ms-wav16-.wav  1.aiff           2-1-320.mp3      4-320.mp3        4.mp3            4.wav
0.mp3            1-320.mp3        1-ms-wav32.wav   1.wav            3-320.mp3        4.aiff           4.wa             cutup
root@fuckpencilpushingnazis:/mnt/mmcblk0p1# cd cutup
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# aplay did.wav you.wav bar.wav the.wav door.wav
Playing WAVE 'did.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'you.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'bar.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'the.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'door.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# 

CHOPPY

would be the understatement of the day, so either i do full sentences or i find a way to time it ... I KNOW I CAN JUST DO IT ON A HUDGE PC , the thing is its cooler to do it on a cm³ sized pc of which i can stash many anywhere around everywhere
my first idea was if this werkz (but the clicking on closing is a bummer) to get some kind of xml whatever defining intonation and spacing (millisecs between samples) ...im only getting into this i dont know whats possible, im not solderman but i actually do have several lcd screens from old broken shit lying around though
who knows, if this keeps up im gonna have PLENTY of time in hellgium with no money and no desire to get outside unless me or the cat is hungry
a decent speechsynth with a sexy voice on a thing like that is probably not possible so
YES I CAN JUST WHOP IN A WHOPPING 64gb sd card, but i wanna do what can with this 64mb sd card, do you understand hobby, it used to be fun, now i just emulate the process, empirical nonetheless i feel demented
AHAHAHAHAHAHAHAHmuahahah i think i has it, its choppy but its a start ...
#!/bin/bash

file="speechline"

cat $file | while read line
do
    echo "Processing new line" >/dev/tty
    for word in $line
    do
        aplay $word
    done
done
simple scripting, the linux way, tell me how that goes in windows without extra software ? (which you have to pay for and if you're lucky they can't revoke the license without you getting your money back, microfascists, i swear if it wasnt for directx .... tsch
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ls
bar.wav        did.wav        door.wav       speaktext.sh0  the.wav        you.wav
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# mv bar.wav bar
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# mv did.wav did
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# mv door.wav door
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# mv you.wav you
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ls
bar            did            door           speaktext.sh0  the.wav        you
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# mv the.wav the
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# cat speaktext.sh0
#!/bin/bash

file="$HOME/COMMON/minimalMel/speechline"

cat $file | while read line
do
    echo "Processing new line" >/dev/tty
    for word in $line
    do
        espeak $word
    done
done
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ls
bar            did            door           speaktext.sh0  the            you
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ls -al
drwxrwxrwx    2 root     root          4096 Apr  9 22:28 .
drwxrwxrwx    4 root     root         16384 Apr  9 22:26 ..
-rwxrwxrwx    1 root     root         33524 Apr  8 03:06 bar
-rwxrwxrwx    1 root     root         33680 Apr  8 03:06 did
-rwxrwxrwx    1 root     root         66984 Apr  8 03:06 door
-rwxrwxrwx    1 root     root           167 Apr  9 22:29 speaktext.sh0
-rwxrwxrwx    1 root     root         26240 Apr  8 03:06 the
-rwxrwxrwx    1 root     root         25620 Apr  8 03:06 you
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ./speaktext.sh0
-ash: ./speaktext.sh0: not found
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# speaktext.sh0
-ash: speaktext.sh0: not found
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# .speaktext.sh0
-ash: .speaktext.sh0: not found
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ash speaktext.sh0
cat: can't open 'speechline': No such file or directory
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# echo "did you bar the door" > speechl
ine
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# ash speaktext.sh0
Processing new line
Playing WAVE 'did' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'you' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'bar' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'the' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Playing WAVE 'door' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
root@fuckpencilpushingnazis:/mnt/mmcblk0p1/cutup# 
a choppy speechserver, so unless someone's providing me a free distance-from-home-learning course in C for openwrt i guess that can wait cos it werks, intonation and timestretching less important
these are micromachines ok, the whole point is not to slam 128gb ssd in it but try to do it on 64mb here
for me, cos i wanna try that
and in the meantime complete minimalMel here, i can command it from the compad whatever script i write over any reachable machine on the network and im pretty sure i can fix it up so andromouse and speech to text lets me do it on voice with a simple $50 android smartphone, about the same price as a vocore, thing is, this vocore is 100% no need to break it while that phone is ... well, THOU SHALT WRITE APPS FOR ANDROID WITHING THE RULES AS WE THE GODS OF GOOGLE TELLS YOU TO
motion script, speechserver
getting all the samples is the boring part but i think ill have plenty of time cos the pencilpushing nazis dont have anything that gets me anywhere so all they can get me is trouble
yea choppy like i said, maybe if it all werkz like i want it to with the hardware i have now i can dabble a bit in c
for instance ... how to directly use that yubikey to plug in to a vocore to use that as an electronic lock